Telehandler Specifications:
- Class Carriage: B
- Capacity Weight: 10,000 lbs
- Lift Height: 44 ft
- Forward Reach: 28 ft 10 in
- Frame Leveling (L/R): 11 degrees
- Machine Weight: 31,320 lbs
- Engine: Cummins 3.8L 74 hp HT (Tier 4F)
- Axles: ZF MST3055 / 3060
- Transmission: ZF 3WG94
- Fuel Capacity: 50 gal
- Tires: Foam Filled 15.5 x 25
- Hydraulic Flow (per min): 49 gal
- Hydraulic Pressure: 3,500 psi
- Hydraulic Oil Capacity: 62 gal
- Length to Fork Face: 21 ft
- Width: 101 in
- Height: 8 ft
- Wheel Base: 125 in
- Ground Clearance: 16.5 in
- Turning Radius: 12 ft
The ideal balance of reach, height, capacity, and maneuverability.
- 360° operator visibility
- Ductile steel manifold
- Suspension seat
- Easy cab mounted grab handles
- Easy service access
- Master disconnect switch
- Protected tilt & extend cylinders
- Boom lift point
- Steel hydraulic & fuel tanks
- Manual lowering valve (cylinders)
- Long life Lexan labels
- Large cross section boom
- Heavy duty boom chains
- Easy tie downs
- Suspended pedals
- Heavy duty pre-cleaner
- Large capacity fuel tank
- Additional high pressure hydraulic filter
- Trunnion mounted sway cylinders Individual gauges/switches
- Melonite pins
- Steel hood
- Standard auxiliary hydraulics
- Solid steel plate chassis
- Steel dash
- Rear axle stabilization (RAS)
- Center mounted powertrain
- Back up alarm with light
- Long life boom rollers
- Dual batteries
- Cab step
- Limited slip front axle
- Electrical aux hydraulic control
Options:
- Pintle hook
- Flashing amber strobe
- Boom work lights – LED
- Rear cab work lights – LED
- Tail, turn, running, brake lights
- Enclosed cab clear glass
- Machine lift points (qty 4)
- Swivel hook
- Steel fenders (qty 4)
- Boom maintenance stand
- Cable reel
- Special paint (excluding cab)
- Special paint (including cab)
- Flashing green strobe
- Back up camera
- Top curved cab glass
- Battery blanket
- Hydraulic tank heater
- Cab heater (aux)
- Cold weather synthetic oil
- Fuel cap – locking
- Outriggers
- Coordinated Motion
Cab Options:
- Open cab
- Enclosed cab w/heat
- Enclosed cab w/heat & AC
- 120hp Engine Surcharge
Carriage Options:
- Carriage 48″ fixed
- Carriage 48″ fork positioning
- Carriage 48″ side tilt – 8,000 lbs
- Carriage 52″ swing – 8,000 lbs
- Carriage 60″ fixed
- Carriage 60″ fork positioning
- Carriage 72″ fixed
- Carriage 72″ fork positioning
- Carriage 72″ side tilt – 8,000 lbs
- Carriage 72″ side tilt – 12,000 lbs
- Carriage 72″ swing – 12,000 lbs
- Carriage 72” – Rake
- Carriage 96″ fixed
*maximum lift capacity on this machine is limited to 8,000 lbs.
Fork Tines Options:
- 4″ x 2.25″ x 48″ (quantity 2)
- 4″ x 2.25″ x 60″ (quantity 2)
- 5″ x 2.25″ x 48″ (quantity 2)
- 5″ x 2.25″ x 60″ (quantity 2)
- 6″ x 2″ x 72″ (quantity 2)
- 6″ x 2″ x 96″ (quantity 2)
- 7″ x 1.75″ x 48″ (quantity 2)
- 7″ x 1.75″ x 60″ (quantity 2)
- 7″ x 2.25″ x 60″ (quantity 2)
- 6″ x 2.25″ x 60″ (quantity 2)
- 6″ x 2″ x 48″ full taper (quantity 2)
- 2″ x 2″ x 48″ block (quantity 2)
- 2″ x 3″ x 48″ block (quantity 2)
Tire Options:
- 14.00 x 24 solid RH (qty 2)
- 14.00 x 24 solid LH (qty 2)
- 15.5 x 25 E3 foam fill (qty 4)
- 15.5 x 25 G2 RH foam fill (qty 2)
- 15.5 x 25 G2 LH foam fill (qty 2)
Attachments:
- Pole grapple 72″ with shoe (CR)
- Sling mount
- Truss boom 12′ (Star)
- Truss boom 15′ (Star)
- Bucket 1.0 cu yd (Star)
- Bucket 1.65 cu yd (Star)
- 4′ x 4′ Personnel platform (Star)
- 4′ x 6′ Personnel platform (Star)
- 4′ x 8′ Personnel platform (Star)
- 4′ x 9.67′ Personnel platform (Star)
- Skid Steer Adapter
Telematics:
- Direct data
- Xtreme OnSite™ dashboard + data
- Keypad
